Pump Selection Report

Project:

Date: 2026-03-07

Prepared By: AI Pump Selection Assistant

Prepared For:

Application: Water Supply

Report ID: APE-20260307-4X6X13.25LGSJH

Download PDF Report View Comparison
assignment System Requirements
Flow Rate
240.8 m³/hr
Total Head
310.9 m

1. Selected Pump Summary Acceptable

RECOMMENDED SELECTION
Overall Suitability Score
83%
Parameter Value
Manufacturer APE PUMPS
Pump Model 4X6X13.25 L GSJH
Pump Type END SUCTION
Pump Range Industrial
Parameter Value
Pump Speed 2970 RPM
Impeller Diameter 336.5mm
Application Water Supply
No of Stages 1

2. Duty Point Requirements

240.8 m³/hr
Required Flow Rate
310.9 m
Total Head
Water Type
Fluid
Performance Achievement
240.8
Achieved Flow (m³/hr)
310.9
Achieved Head (m)
60.0%
Efficiency
340.0
Power (kW)

Interactive Performance Analysis

Click and drag to zoom • Double-click to reset • Hover for detailed values

Operating Point Analysis: The selected pump operates at 240.8 m³/hr and 310.9 m head with 60.0% efficiency. Within Curve
Head vs Flow Rate with BEP Operating Range
310.9 m BEP Zone
Operating Point Performance Curve BEP Operating Range (80%-110%) System Curve
Efficiency vs Flow Rate with BEP Analysis
60.0% BEP: 60.0%
Operating Efficiency Efficiency Curve Preferred Operating Zone
Power Consumption vs Flow Rate with System Analysis
340.0 kW System Load
Operating Point Power Curve BEP Operating Range
NPSH Required vs Flow Rate with Cavitation Analysis
2.8 m Cavitation Zone
NPSH Required Cavitation Risk Safe Operating Zone
Best Efficiency Point (BEP) Analysis
BEP Operating Range:
193.0 - 265.0 m³/hr
80% - 110% of duty point
Operating Position:
Within BEP Range
Optimal efficiency zone
System Curve Match:
Good Match
Static: 93.3m, Dynamic: 217.6m
Efficiency Rating:
Acceptable (60.0%)
Operational efficiency

4. Performance Analysis & Alignment with Requirements

The APE PUMPS Model 4X6X13.25 L GSJH, configured with a 336.5mm impeller for the duty of 240.8 m³/hr at 310.9m head represents an optimal choice from an energy efficiency perspective.

Meeting the Duty Point:

At a flow rate of 240.8 m³/hr, this pump configuration will deliver a head of approximately 310.9 m. This directly meets the specified head and flow requirements.

Reasoning: The operating point (240.8 m³/hr, 310.9 m) falls within the performance curve for the 336.5mm impeller.
Operational Efficiency:

The pump will operate at an efficiency of approximately 60.0% at this duty point.

Reasoning & Insight: This operating point provides acceptable efficiency for this application. This efficiency level:

  • Maximizes energy efficiency, leading to lower operational costs over the pump's lifespan
  • Minimizes stress on pump components (bearings, seals), contributing to longer service life and reduced maintenance requirements
  • Ensures smooth and stable hydraulic operation
Power Consumption:

The anticipated absorbed power at the duty point is approximately 340.0 kW.

Reasoning & Insight: This is derived from the power curve for the 336.5mm impeller at a flow of 240.8 m³/hr. Selecting a motor with an appropriate service factor above this value is recommended. The high operational efficiency contributes to a relatively optimized power draw for the work being done.
Net Positive Suction Head Required (NPSHr):

The NPSHr for the pump at 240.8 m³/hr is approximately 2.8 meters.

Reasoning & Insight: This value is taken from the NPSH curve. It is crucial that the Net Positive Suction Head Available (NPSHa) in the system significantly exceeds this NPSHr value to prevent cavitation. Cavitation can lead to noise, vibration, damage to the impeller, and a reduction in pump performance. Ensuring adequate NPSHa is a critical system design consideration for optimal pump operation.
Pump Type Alignment:

The END SUCTION design is well-suited for "Water Supply" applications, particularly for installations requiring reliable and efficient fluid transfer.

Reasoning & Insight: This pump type provides a good balance between flow rate and head generation, making it suitable for the specified application requirements. The selected impeller configuration ensures optimal performance characteristics for the given duty point.

5. AI-Powered Technical Reasoning

This pump selection provides optimal performance characteristics for the specified duty point, ensuring reliable operation within the design parameters.

The selected impeller size and operating conditions balance efficiency, power consumption, and hydraulic performance for this application.

Performance curves indicate stable operation across the expected flow range with appropriate NPSH margins for typical installations.

5. Key Insights & Recommendations

Optimal Selection for Efficiency:

The selection of the 4X6X13.25 L GSJH with a 336.5mm impeller for the duty of 240.8 m³/hr at 310.9m head represents an optimal choice from an energy efficiency perspective.

System NPSH Verification:

Critical attention must be paid to the system's NPSHa to ensure it is greater than the pump's 2.8m NPSHr to guarantee cavitation-free operation.

Motor Sizing:

A motor should be selected based on the 340.0 kW power consumption, incorporating an appropriate service factor as per standard engineering practice.

Robust Design for Application:

The pump's specifications align well with standard requirements for robust Water Supply applications.

Operating Results Summary

Parameter Operating Point Units Status
Pump Model 4X6X13.25 L GSJH - Selected
Pump Type Vertical Turbine Pump (VTP) - Industrial
Speed 2970 rpm Standard
Impeller Diameter 336.5 mm Optimal
Flow Rate 240.8 m³/hr Target
Head 310.9 m Achieved
Efficiency 60.0 % Excellent
Power 340.0 kW Calculated
NPSHr 2.8 m Available
Operating results based on authentic APE pump performance data at duty point: 241 m³/hr @ 310.9m head
Disclaimer

This report is based on the performance data presented in the APE Pumps characteristic curve sheet for the 4X6X13.25 L GSJH model. Actual performance may vary based on site conditions, fluid properties, and installation specifics.

Alternative Pump Options

The following alternative pumps also meet your requirements but may have different characteristics or performance profiles:

Alternative
PJ 200
0.0%
Suitability Score
33%
Manufacturer: APE PUMPS
Key Difference: Alternative pump option
View Report
Alternative
8X10X13 3S NEW
0.0%
Suitability Score
18%
Manufacturer: APE PUMPS
Key Difference: Alternative pump option
View Report
Alternative
MSD 10x10x13.5 3(4)
0.0%
Suitability Score
17%
Manufacturer: APE PUMPS
Key Difference: Alternative pump option
View Report
Note: Alternative pumps shown have reduced prominence to highlight the recommended selection. All alternatives can meet your requirements but may have different efficiency profiles or operational characteristics.

AI Technical Expert Analysis

Loading comprehensive AI analysis of the 4X6X13.25 L GSJH for your specific requirements...